Rotary Vane Compressors - HR 04 - 07 Compressors
The Hydrovane HR Series of rotary vane compressors unmistakably Hydrovane but one hundred percent new. It's not so much evolution, but Regeneration.
The Hydrovane Regeneration HR Series is reassuringly familiar on the outside with significant changes on the inside.
Â
Â
Â
Â
Â
Â
Share
Key Facts
- 50/60 Hz
- 4 - 7.5 kW
- 7 - 10 bar
- 0.57 to 1.25 m3/min
- 20.1 to 44.1 cfm
- Air compressor only or with tank (air receiver) or with air dryer or with all 3 including air filter packages available (left hand side below)
Versatile & reliable by design
Quiet as standard
With noise levels as low as 66 dB(A) a Hydrovane can be located at the point of use.
High quality air
Clean, dry and pulse free straight from the outlet means less downstream equipment required.
Slow speed
1450 - 2200 rpm speed operation results in low noise, low stresses and long life.
Direct drive
No gears, no belts. Up to 100,000+ operating hours due to its simple integral design.
Hydrovane Pro Electronic Controller – at the heart of your compressor’s performance
Hydrovane Pro puts you in complete control of your compressed air system with innovative features such as:
- Timer Control
- Second Pressure Setting
- Status Display
- Real-Time Clock
- Error Logs
- Digital Inputs
- Group Faults Outputs
- MODBUS RTU
- Flash Programmable
- Sequencer Capability
All Hydrovane by CompAir compressors, both Fixed and Regulated Speed in the 4 to 22 kW model range, are fitted with the Hydrovane Pro Electronic Controller as a company standard. With simple-to-use, efficient electronics, our intelligent control system helps protect your investment with unmatched operational monitoring.
iConn by CompAir
iConn utilises the technological benefits of IIoT and I4.0 to provide smart, proactive real-time monitoring that delivers in-depth knowledge of your compressor’s operational health and performance. This enables total peace-of-mind protection and accurate production planning by generating comprehensive statistics and insights. iConn detects potential issues before they become a problem by promoting fast response times that minimise machine downtime. Our HV11-22 model range are equipped with our iConn Industry 4.0 solution as a standard.
How does Hydrovane compressor save energy?
Regulated Speed (RS)
RS control ensures optimum load conditions throughout the compressor's speed range
> delivering maximum efficiency
Air Intake Modulation
Air intake modulation at minimum speed delivers further energy savings
> To match the reducing air demand
Reduced Energy Venting System (REVS)
> Improved part-load and off-load performance
Warranty that delivery complete peace of mind
The Hydrovane Advance 10 extended warranty programme is a unique market leading compressor care package designed to deliver comprehensive warranty cover for up to 10 years or 48,000 operating hours on all Hydrovane compressor airends.
Features
Key Facts
- 50/60 Hz
- 4 - 7.5 kW
- 7 - 10 bar
- 0.57 to 1.25 m3/min
- 20.1 to 44.1 cfm
- Air compressor only or with tank (air receiver) or with air dryer or with all 3 including air filter packages available (left hand side below)
Versatile & reliable by design
Quiet as standard
With noise levels as low as 66 dB(A) a Hydrovane can be located at the point of use.
High quality air
Clean, dry and pulse free straight from the outlet means less downstream equipment required.
Slow speed
1450 - 2200 rpm speed operation results in low noise, low stresses and long life.
Direct drive
No gears, no belts. Up to 100,000+ operating hours due to its simple integral design.
Controller
Hydrovane Pro Electronic Controller – at the heart of your compressor’s performance
Hydrovane Pro puts you in complete control of your compressed air system with innovative features such as:
- Timer Control
- Second Pressure Setting
- Status Display
- Real-Time Clock
- Error Logs
- Digital Inputs
- Group Faults Outputs
- MODBUS RTU
- Flash Programmable
- Sequencer Capability
All Hydrovane by CompAir compressors, both Fixed and Regulated Speed in the 4 to 22 kW model range, are fitted with the Hydrovane Pro Electronic Controller as a company standard. With simple-to-use, efficient electronics, our intelligent control system helps protect your investment with unmatched operational monitoring.
iConn by CompAir
iConn utilises the technological benefits of IIoT and I4.0 to provide smart, proactive real-time monitoring that delivers in-depth knowledge of your compressor’s operational health and performance. This enables total peace-of-mind protection and accurate production planning by generating comprehensive statistics and insights. iConn detects potential issues before they become a problem by promoting fast response times that minimise machine downtime. Our HV11-22 model range are equipped with our iConn Industry 4.0 solution as a standard.
Save Energy
How does Hydrovane compressor save energy?
Regulated Speed (RS)
RS control ensures optimum load conditions throughout the compressor's speed range
> delivering maximum efficiency
Air Intake Modulation
Air intake modulation at minimum speed delivers further energy savings
> To match the reducing air demand
Reduced Energy Venting System (REVS)
> Improved part-load and off-load performance
Warranty
Warranty that delivery complete peace of mind
The Hydrovane Advance 10 extended warranty programme is a unique market leading compressor care package designed to deliver comprehensive warranty cover for up to 10 years or 48,000 operating hours on all Hydrovane compressor airends.